Cat5e Assembly Network Cable With RJ45 Plug

When assemble the Network Cable, you should pay attention to the below two points:

1) After the threading piece is worn, the Ethernet Cable must be flush with one end of the threading piece. After inserting the Rj45 Plug shell, it must be inserted all the way to the front end of the shell, otherwise the contact will be unreliable.
2). The force of pressing the Lan Cable wire should be controlled well. The great force will cause the reed to be pressed too deeply, which will affect the reliability of contact with the socket, and the small force will lead to the unreliable contact between the reed and the wire. A part of the outer jacket of the cable must be inside the crystal head shell, and the outer sheath is fixed by the shell to prevent the Patch Cable from moving inside the RJ45 connector, which affects the stability of electrical performance.

1. Frequency - 100 MHz
2. Transmission Speed - 1000BASE-TX
3. Available Length - 0.5M~30M or Longer 
4. Connectors - RJ45 Plug unshielded

5. Condcutor- 24AWG or 26AWG or 28AWG (America wire gague) 

6. Cable Construction - unshielded

7. Jacket- PVC or LSZH or PE
8. Install - Used Indoor

Our Factory

Applications: HP Server, Router switch Lan firewall Modern, Computer mac IP phones TV, Gaming system PS4 PS3 xbox 360 lan network networks networking switch TV ADSL computer laptop netgear TPlink router moderm NAS VoIP phones POE Server media players, PS3 PS4 Xbox360 gaming system. 

Our Services

1. OEM/ ODM service is available

2. Fast producing time

3. Remaining the skill of making by hands

4. Reply promptly in 24 hours

5. Sample available

If you have any questions, please contact with us directly. Welcome to visit our factory.

For inquiry, please send mail directly to us.

QQ: 809987636

WeChat:+86-15818652993