Home> Industry Information> The difference between Category 7 box wire and Category 7 jumper wire

The difference between Category 7 box wire and Category 7 jumper wire

February 06, 2021

The difference between Category 7 box wire and Category 7 jumper wire

Category 7 box line uses 4 winding pairs and 1 tensile wire and three layers of shielding. The color of the wire pairs is exactly the same as that of Category 7 twisted pair cables. They are white orange, orange, white green, blue, white blue, and green. Cupronickel and brown. The diameter of bare copper wire is 0.57mm (wire gauge is 23AWG).
Category 7 jumpers use 4 pairs of twisted pairs, which are also white orange, orange, white green, blue, white blue, green, white brown and brown respectively. The diameter of bare copper wire is 7/.016 or 7/0.12, and the diameter of UTP cable is generally 6.0mm.
Internet Cat6 Lan Cable Testing Connection PS4
The main differences between Category 7 box wires and Category 7 jumpers are as follows:

1). From the length of the two
Category 7 box line is a box-by-box line, and the lines are separated without crystal heads, generally 305 meters per box.
7 Jumper wires have crystal heads on both ends, usually 1 meter, 2 meters, 3 meters, 5 meters, 10 meters, 15 meters, 20 meters, 30 meters, etc., and can be directly connected to the computer.

2). From the perspective of the two conductors
Category 7 box wire is a single-strand conductor with a size of 1/0.57, which can be made of pure copper and copper-clad aluminum.
Category 7 jumpers are multi-strand conductors, generally 26AWG, 28AWG, and can be made of pure copper and copper-clad aluminum.

3). From the perspective of both packaging
The type 7 box line is generally a whole roll and a whole roll, and each roll of 305 meters is directly placed in a suitable carton or punched.
Category 7 jumpers are generally packed in PE bags, blister boxes or color boxes, and then packed in boxes.

4). From the scope of application of both
Category 7 box lines are generally used for engineering lines and house decoration.

Category 7 jumpers are generally used to connect to computers, home offices, or routers, HUBs, patch panels and cabinets.

CAT 6 Ethernet Patch Cables (3)

The above is the The difference between Category 7 box wire and Category 7 jumper wire we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> The difference between Category 7 box wire and Category 7 jumper wire
  • Send Inquiry

Copyright © 2024 Shenzhen Kingwire Electronics Co., Ltd. All rights reserved. Privacy Policy

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send