CAT5e
Network Cable, CAT5e network cable wholesale, supply CAT5e network cable, CAT5e
network cable manufacturer, CAT5e national standard oxygen-free copper unshielded network
cable is tested by Fluke, the implementation of standard specifications, the use of high-
quality oxygen-free copper, 99.9% high purity,
The resistance is small, about 100 meters is about 9.5 ohms, the network transmission can
reach 120 meters, the digital high-definition monitoring transmission video signal can
reach 150 meters, coaxial or analog monitoring...
Category 6 network cable, Category 6 network jumper, Category 6 network jumper wholesale,
CAT6 network cable Our factory specializes in the production of various specifications of
Category 6 network cable, Category 6 network jumper, non-shielded Category 6 network
jumper,
Shield network jumper, color network jumper. Factory direct sales of six types of flat
network cables 1-30 meters, six types of flat network cables, ultra-thin network cables,
multi-color customization, six types of flat network cables
Why should the network jumper be produced with No. 28/28AWG copper wire? In the past few
years, some manufacturers have successively introduced 28 AWG jumpers, which have smaller
diameters.
It helps to improve air circulation around active equipment, and because it can relieve
cable congestion and a smaller bending radius, it is conducive to easy cable management in
high-density
Patch Cord areas.
Original machine pressing, unlike hand-made, there will be unstable pressure on the head,
crystal head falling off, and the network cable cannot be in contact with the crystal. The
machine suppressed the network cable will not have similar problems, and the price is
cheaper than manual network cable.
Compared with the mainstream Category 6 (CAT6) and Super Category 6 (CAT6A) cabling on the
market, the Category 7 (CAT7/CAT7A) network cable has no obvious advantages, although its
transmission performance even reaches 40G/100G Ethernet Transmission requirements,
The seven-category (CAT7/CAT7A) network cable is equipped with two layers of shielding,
And use complex, not necessarily based on RJ45 connector, so that its cost is about twice
higher than that of Category 6 (CAT6) UTP system.
Category 5e (CAT5E), Category 6 (CAT6), Category 6 (CAT6A) network cables will be
eliminated sooner or later, and will be replaced by Category 7 (CAT7), Category 7 (CAT7A)
and even Category 8 (CAT8) network cables. In addition, optical fiber seems to have certain
advantages,
However, based on the current situation, the optical fiber routers, switches, and network
cards used with optical fibers are very expensive,
Coupled with the highly difficult wiring process of the integrated wiring project and the
high cost of maintaining related equipment, its advantages are significantly lower than
those of the Category 7 (CAT7/CAT7A) wiring system with mature wiring technology.
The cable manufacturer Shenzhen Kaiweier Electronics believes that the current advantages
of optical fiber cannot overwhelm the Category 7 network cable. According to the long-term
goal, the Category 7 (CAT7/CAT7A) wiring system will become the next protagonist. At
present, Kaiweier Electronics has a full series of shielding structures of S/FTP, F/FTP,
and SSTP for Category 7 (CAT7) and Category 8 (CAT8) network cable products.
For a long period of time in the future, Category 7 (CAT7) and Category Super 7 (CAT7A)
network cables will still meet people's demand for bandwidth.
